Rivet Bell Straps
Various types of bells that attach to the leather strap via a rivet. We have lost the tools and technology on how some of these bells were originally riveted in place. The industry standard today is a flat head screw and a cup washer. It makes for a very nice looking, secure end result. In some cases, especially with stamped bells, I will use a modified modern rivet. Stamped bells can have very thin bases and the use of a screw is almost impossible.
Riveted bells also come with the inherent risk of cracking or breaking. I take special precautions to avoid this from happening, but it can occur. In that case, you will be notified and I will try to place the bell on an inconspicuous part of the strap. In the event the bell becomes unusable, it will be returned to you.
01
Pointed Edge with Faux Stitching
Original strapwork and construction was copied in dark brown leather. Bells were not cleaned per customers request. Original buckle was reused as well.
02
25 Brass Bells on Doubled & Stitched Black Strap
Small brass bells installed on a doubled and stitched black leather strap. Brass buckle and raised billet.
03
Riveted Style Bells on Single Straps with Rings
Variety of single strap door hangers with brass rings, creased edges.
04
Fasteners
Modified rivets on the left for use with thin stamped bells. Standard brass screw and cup washer fasteners on the right. Screws and washers can be darkened to blend in with old bells, if desired.
